Replacement Patio Door Handle
Handles for patio doors are an essential part of the security of your home. It is essential to address any problems with your patio lock as fast as possible to keep your home secure.
To get started, you must first identify the lock on your patio door that you have already installed. This will help you determine what kind of lock replacement you should order.
Identification
The lock that you have on your patio door plays an important function in the operation and security of your home. Over time the lock may become damaged or worn and requires replacement. It could be due to a variety of causes such as a damaged handle, loose latch or the inability to turn a handle spindle properly. It is good to know that changing your patio door lock is a simple job that most homeowners can perform themselves.
Begin by identifying the type of lock you own. You can do this by looking at how the handle's small actuator lever enters the latch hasp or by looking at the lock itself. This is important because the type of lock you require is determined by the style of the patio doors as well as the specific problem with the lock.
Rectangular mortise locks with cutouts are commonly used on aluminum patio doors. However, they can be found on vinyl and wood patio doors as well. The locks are set in a recess inside the frame of the patio door. replace upvc door lock mechanism are fitted with rectangular screw holes. You can also snap a photo with a digital camera, and send it to the supplier. This is a simple way to make sure that the new patio lock matches your existing system.
Top and bottom tab styles of locks are commonly found on patio doors that are older. These are usually more secure than sliding bolt locks because they engage with the door frame and stop the door from being pushed or lifted open. Sliding bolt locks are more popular on patio doors that are newer. They use a metal slidebolt that retracts into strike plate to give it additional security and strength.
To increase security, you could add an electronic lock that is keyed to your patio doors by replacing the knob and handle with one that is designed to accommodate a keyed lock. This is a great way to keep your pets, family members and possessions safe and prevent criminals from gaining access to your patio doors, especially if you live in a region that has a high rate of crime.
Cleaning
If a patio lock is operating properly, it will hold the door securely against intruders and weather elements. Outdoor door locks, as all hardware, require periodic cleaning and oiling to prevent them from becoming stiff and inability to work effectively. The good part is that the cleaning process is simple, straightforward, and affordable and can be performed by any homeowner.
A door that is squeaky is typically caused by dust and dirt accumulation in the mechanism. Baking soda and vinegar are a simple solution that can be used to loosen grime and make it easier to clean using a toothbrush or sponge. In this cleaning procedure, it's also a good idea to make use of a can of compressed air to remove any dirt-laden particles that are stubborn to remove.
To prevent squeaks, apply a thin layer of lubricant over the keyholes, latches, and other moving components following cleaning. Make sure to not apply too much of the lubricant as too much can attract dirt and interfere with the functionality.
After lubrication is complete after which the lock needs to be checked to ensure it is working properly. If the lock is still squeaking, it may be due to a small misalignment between the hinges and the frame. If this is the case it is crucial to correct the issue before it gets worse by adjusting the lock points and the door to ensure that it is aligned with the frame.
It's an enormous issue when your uPVC handle won't move particularly if it makes you open to intrusions from the elements. This issue can arise by a variety of factors that range from minor changes in weather to lack of maintenance on movable parts. But, if the problem is addressed promptly, it's possible to restore the door's functionality. The best way to safeguard your home is to keep your uPVC doors and locks by proper care and cleaning practices.
Lubricants
The locking mechanisms of your patio door may be affected by dust or debris that can make them hard to open and latch. In these instances you will require lubrication to solve the problem. You should clean the lock mechanisms first before applying lubricant. The lubricant must not be oily since it could attract dust particles, which could cause more problems for your patio doors. Hardware stores sell dry lubricants that are ideal for locking mechanisms that require lubrication.
Powdered graphite is the most effective oil to use on locks. Locksmiths have been using it to lubricate metal components for years because it does not draw dust like liquid oils. It has a waxy consistency that stays in the lock to provide lasting lubrication. Graphite can be safely used and applied again to keep the lock operating smoothly.
If you want to grease the lock, you should first clean it using an impermeable cleaner like WD-40. After cleaning the lock, keyhole, mechanism, and cylinder, you can apply dry lubricant. This will enable the lock to function smoothly and prevent it from becoming stuck or blocked.
A high-quality silicone spray is available in most hardware stores under various brands. This type of lubricant can give you the most effective results and is available in different sizes. It will also protect the lock from corrosion. Before the advent of dry lubricants those who wanted to lubricate their items using moving parts had to use oils such as WD-40 however this method could cause dust to build up and damage the lock.
If your sliding patio door handles are difficult to open or close, you might need to replace the lock assembly. The most common causes of this problem are loose screws, rust or a misalignment with the latch. Fortunately changing the lock is easy and can be accomplished with minimal effort. If you're not sure what to do, you can ask an experienced company for assistance.
Installation
The patio door lock is one of the most important elements of your home's security system. A lock of high-end quality that is in good working condition will help keep your home and family safe from intrusions by unwanted criminals. Regular maintenance and inspection will ensure that the lock functions properly. It is recommended that if you spot any issues with your patio lock, you seek assistance from a professional. A locksmith or a door hardware specialist can give you the expert guidance that you need and will aid in ensuring that your new replacement patio door lock is set up properly.
The first thing you will want to do is identify your existing patio door handle. The keyway is the opening that the key fits into to unlock and lock the door. When purchasing new locks, you can accurately describe the keyway by taking a photo.
It is important to note the size and type of your lock. Different types of locks will have different mounting holes and swing directions, in addition to different sizes of hasps. These information will help you decide which type patio door lock to purchase for your sliding doors.
Surface mount locks, such as the ones illustrated here by Cal-Tech are simple to install and can be used on all sliding patio doors. They require the use of an screwdriver to take off the old handle, but once the screws have been removed, you can replace it with a new surface mount lock.
Steel mortise style locks are more common in wooden and aluminum patio doors. They fit in a pocket cut into the frame of the door. These locks are more difficult to change out than other locks for patio doors however, you can make it happen with some time and effort.
It is essential to know the precise size of your mortise lock to ensure that you can replace it with a comparable one. Most mortise locks are of the same size, but there are some key distinctions. The most significant difference is that some have vertical keyways while others have keys that are angled to 45 degrees.